NU407 Cylindrical taper Roller Bearing Chrome Steel With P5 / P6 Precision Rating

Introduction Of Taper Roller Bearing

Tapered roller bearings mainly bear radial diameter, axial joint load. Load bearing capacity depends on the outer ring raceway angle, angle the greater carrying capacity. These bearings are separable bearings, according to the number of columns bearing rolling elements into single row, double row and four row tapered roller bearings. Single row tapered roller bearing clearance to be user adjusted during installation; double row and four row tapered roller bearing clearance in the factory based on the given user requirements, users do not need to adjust.
Tapered roller bearings have tapered inner and outer ring raceways, tapered rollers are arranged between the two. All conical surface projection lines are a little get together with the bearing axis. This design makes tapered roller bearings particularly suitable for the accommodation of combined (radial and axial) loads. Most of axial load bearing capacity is determined by the contact angle ; greater the angle, the higher the axial load capacity. Angle size to calculate the coefficient e; e value, the greater the contact angle, the bearing axial load greater applicability.

Quick description:

Model:NU 407

Dimension:35x100x25mm

Bore Size:35mm

Outside Diameter:100mm

Width:25mm

Basic Dynamic Load Rating:76.5kN

Basic Static Load Rating:69.5kN

Fatigue Load Limit:9kN

Limiting Speed:9500r/min

Mass:1.0kg

Material of Rings and Balls: Chrome steel,Carbon steel, Stainless steel

Cage Material: Brass,Steel,Nylon

Cage Type:NU 407

Package: Usually made by plastic tube+anti-rust paper+box+carton

Terms of Payment: T/T(30% deposit in advance), Irrevocable L/C at sight, Western Union

Delivery Time: 3-25 days, according to the order quantity

Application of Cylindrical Roller Bearing NU 2211 ECP, NU 2211 ECM, NU 2211 ECJ: motor, locomotives, autos,spindle,equipment, internal combustion engine, generator, gas turbines, reducer, rolling mill, vibrating screen and lifting transportation machinery, etc.

Single row: NU, NJ, NUP, N, NCF and NJG designs

Double row: NNU, NN and NNF designs

DWR Bearing Co., Ltd. was founded in 1998, after more than 10 years of development, nowadays has become into a group corporation with several subsidiaries. Our factory covers an area of 30, 000 square meters, construction area of 19, 000 squre meters, along with advanced production line and modern test management. At present, the quality of our bearings has reached advanced level in the international market. Our business philosophy is Quality First with Faith Base. We mainly produce Deep groove ball bearing, Self-aligning bearing, Taper roller bearing in Metric and Inch sizes, Cylindrical roller bearing, Pillow block bearing, Rolling mill bearing and Multi-row composite bearing. Our products are exported to Southeast Asia, Europe, the Americas, the Middle East etc. Our company with high-quality, reasonable price, good reputation won the high praise from customers at home and abroad. In 2002 we obtained ISO9001:2000 international quality system certification. Meanwhile, we have been absorbed in product quality and advanced technology aiming to provide excellently precise products all these years