High Speed Deep Groove Bearing / Stainless Stell Grooved Ball Bearing

1: Deep Groove Ball Bearing Information:

Single row radial ball bearings are the most widely used bearings and utilize an uninterrupted raceway, which makes these bearings suitable for radial loads, or a combination of thrust and radial loads. This design permits precision tolerances even at high speed operation. Shielded bearings are protected on one, or both sides (suffixes Z and ZZ, respectively) by metal shields fastened to the outer ring. This close clearance labyrinth seal retains the lubricant and prevents the entrance of foreign matter. Sealed bearings incorporate steel reinforced rubber seals securely fastened to a groove on the outer ring. Contact with the inner ring is by sealing lip (Contact Suffix LLU). Or, non-contact with the inner ring is by labyrinth seal (Non-contact Suffix LLB) to provide positive sealing at all times.

2.Deep Groove Ball Bearing Protection:

1. The installation is correct, that affects precision, life, performance. And fill the bearing with lubricant after installation.
2. Don't allow strong impact, such as hammer striking, transfer roller pressure
3. Use the accurate installation tool, avoid to use cloth kind and short fibers
4. Lubricate the bearing to avoid rust with high quality mineral oil, especially in summer
5. General inspection, such as the surrounding temperature, vibrate, noise inspection
6. Keep bearing cleaning from dirt, dust, pollutant, moisture.
7. Bearing should not be ultra cooled.
3:Deep Groove Ball Bearing Application:
This bearings can be used: After ing equipment, machine tool spindles, plug-in, ordinary type cooling tower, resistance welding machine, aging furnace, hobbing machine, environmental protection equipment, whirlpool pump, ceramics engraving machine, metal packaging machinery, fishing machinery, high pressure reactor, offset printing, aerospace, rubber granulating machine, plastic machine, chip conveyor, and so on purpose.

The ring and balls are made of refining bearing steel Gcr15(AISI52100,the retainer are punched from brass strip(H62) or top quality cold-rolled strip(spcc BQ B402)and reinforced plastics are available if necessary.The shield is made by phosphatzing steel skeleton and butyronitrile rubber with hot pressed .

The rings and balls of stainless stell bearings are made by refining stainless stell 9Cr18(AISI440c).

Every 10sets bearings are packed into plastic tube or raped by rustproof paper and paced into carton box.Single pakage is available,that is,each set bearing is contained info plastic bag and then packed in smalliner box .

Package:

1. Neutral Packing
Bearing + Neutral Plastic Bag(Tube) or Neutral Box + Neutral Carton + Pallet;
2. Industrial Packing
Bearing + Industrial Kraft Paper + Carton + Pallet;
3. Commercial Packing
Bearing + Plastic Bag + Color Box + Carton + Pallet;
4. As Your Requirement.

DWR Bearing Co., Ltd. was founded in 1998, after more than 10 years of development, nowadays has become into a group corporation with several subsidiaries. Our factory covers an area of 30, 000 square meters, construction area of 19, 000 squre meters, along with advanced production line and modern test management. At present, the quality of our bearings has reached advanced level in the international market. Our business philosophy is Quality First with Faith Base. We mainly produce Deep groove ball bearing, Self-aligning bearing, Taper roller bearing in Metric and Inch sizes, Cylindrical roller bearing, Pillow block bearing, Rolling mill bearing and Multi-row composite bearing. Our products are exported to Southeast Asia, Europe, the Americas, the Middle East etc. Our company with high-quality, reasonable price, good reputation won the high praise from customers at home and abroad. In 2002 we obtained ISO9001:2000 international quality system certification. Meanwhile, we have been absorbed in product quality and advanced technology aiming to provide excellently precise products all these years